ʻO kamīkini ʻaʻano pana puhi mīkininui ka hiʻohiʻona o ka nui, a ʻoi aku ka paʻakikī o ke kaʻina hoʻonohonoho ma mua o nā lako liʻiliʻi. ʻO ka hoʻonohonoho pololei a me ka mīkini hoʻāʻo ke kī i ka hōʻoia ʻana i ka hana maʻamau o nā pono o hope. I ka hana o ka hana mua mākaukau ʻole, koi ʻia nā mea hoʻohana e ukali pono i nā ʻōkuhi o nā limahana kūpono a i ʻole kuhikuhi i nā kuhikuhi. Hiki i ka hana ʻae ʻole ke hana maʻalahi i nā hōʻino i hiki ʻole ke hoʻoliʻiliʻimīkini pana puhi mīkini. ʻO kashot blasting machine manufacturer has sorted out the precautions for installation and test machine to share with you. I hope it will be helpful to users who use the device for the first time.
1. Installation. ʻO kamīkini ʻaʻano pana puhi mīkini is installed and debugged in the production plant and disassembled into several parts before being transported to the user site for installation. Although there is no pit, the foundation must be firm, the anchor bolt holes must be standardized, and the chamber body must be adjusted. After the second irrigation, the anchor bolt nuts can be tightened after solidification. After the chamber body is fixed, the various parts can be installed. ʻO kaprecautions for the installation and debugging of the relevant components are introduced below.
1. Pana peli noonoo:
ʻO kashot blasting device has been installed on the chamber body before leaving the factory. Please pay attention to the problems to be debugged before use. Check whether the fixed positions of the blade, the pill wheel, the directional sleeve, and the guard plate are accurate and firm, and check whether the direction of rotation is correct after power on. Then adjust the position of the directional sleeve opening. Theoretically, the angle between the front edge of the directional opening and the front edge of the blade throwing position is about 900. After fixing the position of the directional sleeve, the position of the projectile belt can be detected by hanging Place a steel plate or wooden board on the position of the workpiece facing the exit of the shot blasting machine, start the shot blasting machine, put a small amount (2-5kg) of projectiles into the blasting tube, and then stop, check whether the hit position on the steel plate is suitable for the needs, such as Close the window of the bias-adjustable directional sleeve downwards, and vice versa, until it fits, and note the position of the directional sleeve opening as a basis for future replacement of the directional sleeve.
2. Hoist a hoʻouka hoʻoili:
E hana mua i kahi hoʻokolohua ʻaʻohe hoʻouka e nānā inā ke holo pono nei nā pākeke hoʻoholomua a me nā pahi ʻoniʻoni i ke ala pololei, a laila hoʻopaʻa i ke kāʻei o ka huki i kahi ʻano kaulike e pale ai i ka hoʻololi ʻana, a laila e hana i kahi hōʻike ukana e nānā ka hana a me ka hiki ke lawe, inā paha he ʻano ʻē o ka walaʻau a me ka haʻalulu, e nānā a hemo i nā mea keʻakeʻa.
3. Hoʻokaʻawale one-pil:
E nānā mua inā he maʻalahi ka neʻe ʻana o ka hipa kāne, a laila e nānā i ke kūlana kūpono o ka pā hoʻokaʻawale, a laila ke hoʻouka ʻia a hoʻouka ʻia ka huki, aia ka hele mau o nā pana kila, a nānā inā e lele ana nā kī kila a hāʻule. ke hoʻopau ʻia ka chute